LED diving flashlight 60 Meters
Light Source: CREE XML-U2
Power consumption: 10 W
Modes: Super bright / energy saving
Luminous Flux: 700 LM
Run time - Super bright: 8 Hours
Waterproof: 60 meters
Battery Type: 1 x 26650
Size: 200 mm Length x 52 mm Head diameter x 40 mm Body diameter
Weight: 320 Grams (Include battery)
LED diving flashlight
1. Diving depth of up to 60 meters, beam range of 90 meters under water.
2. Fitting Cree XML-U2 LED, 6000-7000K color temperature, bringing super bright, stable, durable feature.
3. Aeronautical 6063 aluminum material in the head of flashlight, after hard. oxidation treatment, resistant to abrasion, and the PC flashlight body and tail cap with fire retardant and acid and alkali resistance.
4. Built-in 3 cell 18650 Lithium batteries, total capacity of up to 7200mAH, bringing constant lighting time over 12 hours.
The switch is with a lock to prevent it from careless pressing. Please turn on the lock according to the opening direction
Press the switch for the first time is super brightness mode; press it for the second time is energy-saving mode;
press for the third time is turn off.
Adjust suitable brightness: long-press the switch in super brightness mode, and loose in the suitable brightness.
Please do not disassemble the head as which is fixed, or it will influence the tightness and stability of the flashlight.
Apply a little Vaseline to screw threads and “o” ring when the screwing of tail cap is unsmooth.
When the batteries come to the life ends, the customer could deliver the flashlights back to our company for changing
the new batteries.
Wrench the tail cap open. Insert the Microu charging plug into the Microu round hole of the flashlight, then it starts to charge.
When the indicator is flashing, the batteries are in the charging mode. The indicator will turn to green constant light
when the batteries are full charged.
Please charge fully in initial use, or the battery life might be reduced.
The light must be avoided shooting at eyes directly. Or the light beam might cause a short blindsight or damages of the eyes.
Please clean the flashlight surface by freshwater; and then dry it with a cloth or a hair dryer after each use under water.
Child is not allowed to use the flashlights without adult supervision.
The components of the flashlight have been fixed before they go out. Please do not disassemble them.
Please do not exposure the flashlight in the sunlight for long time or in high-temperature environments.